Elevate Your Bathroom - Steps To Install A New Shower Unit

Book Your Appointment

What're your ideas concerning How to Install a Shower Enclosure ?

A successful shower installment needs mindful planning and also a lot of job. In most cases, you will certainly need to do 3 kinds of tasks: mounting walls, installing the plumbing, and also completing wall surfaces.

Preparation

Firstly, you have to decide on the kind of shower that you desire to install. It is necessary to establish whether the chosen shower is capable of coping with specific systems and can manage a safe degree of water through the central heating boiler. The majority of shower systems nowadays are designed to be versatile to different water pressures (such as stored warm water and chilly mains).
It is likewise important to take into consideration the water stress and also the planning of the piping and drain for the shower

Various Sorts Of Shower Units

Push-on Mixer: The tube and spray parts of the push-on mixer shower unit can be linked to the bath faucet based on your demand, and also the water temperature can be changed using the taps. Push-on mixers are cheap as well as extremely easy to set up. However, although the hose link is straightforward, it is quickly displaced. Additionally, it is inconvenient to change the temperature level.

Bath/Shower Mixer: The tube and spray of this type of shower are integrated with a bathroom mixer faucet, and also the temperature level can be adjusted through the bathroom taps. It is a very low-cost choice and no extra plumbing is involved. Nevertheless, the bath/shower mixers likewise experience troublesome temperature control choices.

Manual Mixer: The hose pipe and also spray of a hand-operated mixer shower device belong of the wall surface system as well as the hot and cold water supplies are connected to a solitary shutoff The temperature level as well as pressure of the water are controlled through either one or a selection of handles (in a lot more costly showers). Although temperature control is a lot easier in hand-operated mixer kinds, they are a lot more expensive than the previously mentioned mixers. They additionally need extra plumbing of cold and hot water supply pipelines.

Thermostatic Mixer: The pipe as well as spray of this shower type are a part of the wall surface system as well as the hot and cold water materials are connected to a single valve below also. It is full with an integrated stabiliser to self-adjust the water temperature and to avoid it from ending up being too hot. Among the largest advantages of a thermostatic mixer shower type includes hassle-free temperature level control. Nevertheless, it is the most expensive of the different mixer choices.

Power Shower: A power shower is a single device having an effective electric pump that is capable of modifying both the water pressure and temperature level. This sort of shower can be fitted if there is water system from a cold water tank and also a hot water cylinder. A power shower makes the change of both stress and temperature level simple. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is supplied by a mix boiler under keys pressure.

Electric Shower: An electric shower is plumbed right into a mains cold water supply and it warms the water electrically. It is very important to note that for this shower kind to be set up, the keys pressure needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The unit permits the temperature and also stress to be adjusted using a knob. Models with temperature level stabilisers are much better as they stay unaffected by various other taps in other places being used within the household. A significant drawback of electrical showers is that the control knob just allows for the alternative of high temperatures at much less stress, or lower temperature levels at a higher stress. This is troublesome in the winter when the spray is typically weak and the keys water is colder. Nevertheless, this problem is dealt with in some models which are offered with a winter/summer setup.

Method

Depending upon the type of shower you want to mount, the shower head should either be suited order to avoid its contact with the water in the bathroom below or the base tray, or it needs to have a check shutoff.
Before beginning, it is suggested to mark the settings of the shower head and control, and to prepare the pipe-work entailed. Furthermore, the water drainage system to get rid of the waste water will certainly require to be prepared. Both positions of the cord route as well as the shower button will likewise require to be considered if an instant or electrical shower unit is being installed.
Utilize the guideline guide supplied with the shower device to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is necessary to cut off the supply of water. In order to shield the pipelines, they need to be offered a waterproof covering and also fitted with isolating valves. The pipelines can after that be hidden into the wall as well as smudged over to neaten the total look.
Fit the base tray, shower head, and fittings.
Link the major shower control to the pipelines that will be supplying the water (This may require a female screw string adapter).
Reconnect the water and also test the pipes for any leaks, as some may require firm.
If you are mounting an electric shower, remember to switch off the electrical power supply before making any type of electrical links. As soon as these links have actually been made (there need to be guidance within the instruction manual), the power supply can be switched back on.

Adjusting Water Pressure to Match Your Shower

The cold water reservoir can be lifted to a greater height (sometimes as little as 150mm (6inches)) by fitting a strong wooden support beneath it - possibly made up of struts and also blockboards. If you pick this alternative, the major and also circulation pipelines will certainly likewise have to be elevated to fulfill the brand-new height of the reservoir.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is chosen, it must be attached into the power supply in order to operate.

Piping and Water drainage

It is best to utilize 15mm diameter supply pipelines, and also make the runs to the shower as short and also straight as feasible so as to keep optimal pressure and also reduce warm loss. Furthermore, by minimising the use of elbows for pipeline edges, you can reduce the resistance in the flow of the water supply. You can attain this by flexing the pipes instead.

The Majority Of Usual Errors

Breaking or ignoring neighborhood code constraints.

Utilizing pipes that are also little.

Connecting copper to galvanized without using a brass or dielectric suitable between the two.

Not using tape or pipe substance at threaded joints.

Not leveling your fixtures when mounting them.

Not setting up an air gap loading for fixtures.

Cutting supply stub outs also short to install the shutoff valves onto after the ended up wall is in area.

Not correctly aligning tubes into installations or stop valves. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will cause a leakage.).

When turning the water back on in your house, always run the outdoors hose pipe valve or purge your toilets to hemorrhage dirt and also air from the lines. This debris can create issues in your sink taps and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I was made aware of that editorial on How to Install a Direct-to-Stud Shower Enclosure through an acquaintance on a different domain. Enjoyed reading our entry? Please share it. Let another person check it out. I appreciate reading our article about How to Build a Shower Enclosure for Your DIY Bathroom.

Request An Estimate